Post

pico-mc-display-bridge

Posted Updated
soldered prototype hardware
soldered prototype hardware
By rppicomidi
1 min read

pico-mc-display-bridge

Use 2 Raspberry Pi Pico boards to add per channel and global display to any Mackie Control compatible MIDI controller. Also adds MIDI stream processing. You insert this project between your MIDI control surface and your DAW computer.

I managed to break my hardware, so I have not updated or tested this project in a while. If there is any interest in seeing this project updated, please file an issue and I will see if I can revive my hardware. If there is no request to update this project in 2026, I will archive the project.

MIDI-DIY-Project, pico-mc-display-bridge
usb-midi-host tinyusb usb-midi-device serial-port-midi daw-control rp2040 c-sdk
This post is licensed under CC BY 4.0 by the author.